Sunday, May 3, 2009

How to Rivet

by Nancy of nancyrosetta

With these basic techniques you can make any layered design.
I chose a simple 4 petal design. I used 18ga sterling silver sheet, 20ga copper sheet and copper wire 1/16"thick (I don't know what gauge it is).

First, draw a design on your silver sheet then drill a hole somewhere in the design that looks good to insert the saw blade. Pierce out your design. Saw any extra silver away.

Clean up the surface of your pierced design and file and sand the edges making sure to round the corners slightly (if there are corners).
Decide where you would like your rivets, and using a spring loaded punch or an awl with a hammer, make small indents where you are going to drill. This step is crucial because the drill bit will just skate across the metal if there is no guide for it.

Drill out all the holes in the top piece, and only one hole in the bottom piece.

Using wire that is the exact same size in diameter to the hole you drilled, cut the rivets to a length that will only allow a small amount to poke out each side of the rivet. If you have too much wire coming out the top and bottom, you will have a sloppy rivet that will most likely distort your design.

Clean up both ends of the wire rivet. I accomplish this by grasping the rivet in my flat nose pliers and rubbing the cut end on sandpaper.

Insert the wire rivet into the drilled holes of both top and bottom. Use the business end of your riveting hammer to gently make a bunch of cross hatched notches in the top (or a star pattern will work). Be careful, you don't want to mar the surface of your design, you only want to stretch the rivet out. Turn the piece over and do the same to the back of the rivet. You will still see a small bit of length on either side. Now turn the hammer over to the square flat side and hammer gently to flatten the metal, turning the piece over a couple of times to keep it even.

Now drill out the other hole. If your design had more than one rivet left to do, you could drill out the rest now. That first rivet is tight enough to hold it together. We waited until the first rivet was done so we could be assured of nicely lined up drilled holes. The rivet wire is exactly the same size as the hole, so any variance would make it impossible to insert the wire had it shifted.

Perfect hole for riveting.

Rivet the next holes the same way as the first.

Now finish sawing out your design then file and sand the edges. Sand the face to remove a bit more material to make it flush. I do this by turning the piece upside down on a piece of sandpaper 240 grit, then 320 grit, and so on until I reach the finish I desire, always sanding in the same direction.

Now you can either solder a bail onto the pendant, or since we are doing a cold connection, just drill a hole for a jumpring.

Saturday, May 2, 2009

Spring is in the Air

by Kerry of KHawkinsPhoto






My yard is full of blooming flowers and some ready to bloom. I love spring, it is a time where everything seems to come to life. I took out my macro lens and had a photo safari in my back yard. I love to capture the delicate details of these flowers



Friday, May 1, 2009

Craft Season Begins - May Shows with Boston Handmade Members

by Jennifer Tang of MaJenta Designs

Craft Show season has officially begun and Boston Handmade members are showcasing and selling their wares all throughout the greater Boston area and New England! Come check us out in person at any of these various shows!

MaJenta Designs will be at

Design Hive Market

Sunday, May 3rd (10am – 5 pm)

28 Sacramento St.

Cambridge, MA


Sea Glass Things will be at

South End Open Market – Opening Weekend

Sat/Sun May 16th & 17th (10am – 4pm)

540 Harrison Ave.

Boston, MA


Kerry Hawkins Photography will be at

JP First Thursdays

Thursday, May 7th (5 – 8pm)

Curtis Hall Lawn

20 South St.

Jamaica Plain, MA


Vintage by Crystal will be at

Design Hive Market

Sunday, May 3rd (10am – 5 pm)

28 Sacramento St.

Cambridge, MA


Lucie Wicker Photography will be at

South End Open Market – Opening Weekend

Sat/Sun May 16th & 17th (10am – 4pm)

540 Harrison Ave.

Boston, MA


Blue Alvarez will be at

JP First Thursdays

Thursday, May 7th (5 – 8pm)

Curtis Hall Lawn

20 South St.

Jamaica Plain, MA


Bancroft Studios will be at

Brewster in Bloom

May 2nd and 3rd

Brewster, MA


Arts In The Park
May 8th
Andover, MA


North River Arts Festival
May 23rd, 24th
Marshfield, MA


Chroma Lab will be at

JP First Thursdays

Thursday, May 7th (5 – 8pm)

Curtis Hall Lawn

20 South St.

Jamaica Plain, MA

South End Open Market – Opening Weekend

Sat/Sun May 16th & 17th (10am – 4pm)

540 Harrison Ave.

Boston, MA


Linda B Dunn will be at

RISD Alumni Sale

May 2nd (10am – 4 pm) rain or shine

Benefit Street

Providence, RI,

(on the RISD campus)


Western Avenue Studios First Saturday

May 2nd

122 Western Ave, Suite 350

Lowell, MA, 01851


Christine Marie Art will be at

South End Open Market – Opening Weekend

Sat/Sun May 16th & 17th (10am – 4pm)

540 Harrison Ave.

Boston, MA


South End Open Market

May 31st (10am – 4pm)

540 Harrison Ave

Boston, MA


Lush Beads will be at

Western Ave Suite

May 2nd

350 Lowell, MA 01851


SOWA Art Walk

Sat/Sun, May 16th & 17th

560-580 Harrison Ave.

Boston, MA


Elizabeth Brennick Designs will be at

South End Open Market – Opening Weekend

Sat/Sun May 16th & 17th (10am – 4pm)

540 Harrison Ave.

Boston, MA


Providence Open Market’s Opening Day

May 23rd (10am – 4pm)

Lippit Park

Blackstone Blvd

Providence, RI


Concord Arts Market – Opening Day

May 30th (9am – 3pm)

33 Capitol St.

Concord, NH


Jessica Burko/Reclaimed to You will be at

Inside Out

May 1 - June 27th, 2009
Opening Reception Friday May 1, 2009, 7-9pm
Gallery 1581
Boston Graduate School of Psychoanalysis
1581 Beacon Street

Brookline, MA 02446


RISD Spring Art Sale
Saturday, May 2, 2009
10am - 4 pm, rain or shine.
Benefit Street

Providence, RI

(on the RISD campus)


SoWa Art Walk

May 16 - 17, 2009 (11am - 6pm)
35 Wareham Street
(between Harrison Ave. and Albany St.)


Stonehouse Studio will be at

Design Hive Market

Sunday, May 3rd (10am – 5 pm)

28 Sacramento St.

Cambridge, MA


Joy of Old - Mother's Day Trunk Show

May 7-9

85 Warren St.

Charlestown, MA


South End Open Market – Opening Weekend

Sat/Sun May 16th & 17th (10am – 4pm)

540 Harrison Ave.

Boston, MA


South End Open Market

Sun May 23rd (10am – 4pm)

540 Harrison Ave.

Boston, MA


South End Open Market

Sun, May 31st (10am – 4pm)

540 Harrison Ave.

Boston, MA

Related Posts Plugin for WordPress, Blogger...